Network problems,
decoded.
Windows reports connectivity in five icons and three sentences, and the difference between them decides whether the fix takes ten seconds or costs you every saved Wi-Fi password on the machine. Here is what each state is really claiming, and what each of the four reset commands actually resets.
Before you reset anything.
«No internet» is almost never a computer problem, and Windows cannot tell you that.
Windows knows whether it has a link, whether it has an IP address, and whether it can reach something of its own. It has no way of knowing whether your provider is down, whether the router's WAN cable is unplugged, or whether the captive portal of a hotel is holding your traffic. So it reports the one fact it has — «No internet» — and every troubleshooting article on earth then tells you to reset that fact on your machine.
Order matters more than knowledge here. Test with a second device first. If your phone has internet on the same Wi-Fi, the problem is this machine and the entries below apply. If nothing has internet, no setting on this page will help you.
- Learn the three states apart. Connected with no internet, Unidentified network, and Limited connectivity mean three different failures — DNS, DHCP and link layer respectively.
- Escalate in that order. Flush, then renew, then the two
netshresets, then Network reset. Each step is reversible; the last one is not, and it is the one people reach for first. - Write down your static configuration before you touch a reset. Manual IP, custom DNS and VPN entries are exactly what a reset deletes. If you never configured them, you have nothing to lose.
- Disable is not uninstall. Disabling an adapter is a switch you undo in two seconds. Uninstalling the device can leave you without the driver that lets you download the driver.
The states and the commands.
Find the icon or the sentence you are looking at. The first six entries are what Windows is telling you; the rest are what you can do about it.
No internet — connected, with the blue X
- What it is
- The link is up, you have an address, and Windows' own probe to a Microsoft endpoint failed. Everything below the network stack is working; something above it is not.
- What changes
- Nothing by itself. The honest reading is that the router has no WAN, a captive portal is intercepting you, DNS is not resolving, or a firewall is dropping the probe. Test one website by IP address before you change a single setting on the PC.
- Risk
- Reversible This is a status, not a control. The risk comes from what you decide to reset because of it — see the Network reset entry.
Unidentified network — usually a DHCP failure
- What it is
- Windows has a link but could not get a usable configuration, so it assigned itself an address from the 169.254 range. The network exists; your place in it does not.
- What changes
- The two commands that fix this are
ipconfig /releaseandipconfig /renew. If the router's DHCP pool is exhausted or the router is half-dead, renew fails too, and the fix is on the router, not here. - Risk
- Reversible A lease renewal drops connectivity for a couple of seconds and changes nothing else. It is the correct first move for this state.
ipconfig /flushdns
- What it is
- Empties the local resolver cache: the list of names this machine already looked up and is reusing without asking again. It does not change your DNS server, your IP, or anything the router knows.
- What changes
- The next visit to each site triggers a fresh lookup. That is the whole effect. It genuinely fixes the case where a site moved to a new address and your machine kept knocking on the old one — which is also why it fixes problems that are not that, by coincidence and timing.
- Risk
- Reversible The safest command on this page. The only visible cost is that the first few pages load a few tens of milliseconds slower while the cache rebuilds.
netsh winsock reset
- What it is
- Rebuilds the Winsock catalog — the registry of which network providers and layered service entries applications load when they open a socket. VPN clients, proxies, firewalls and some security suites live in that catalog.
- What changes
- Every custom provider entry is removed and the catalog returns to the Windows default. It requires a restart. This is the command that fixes «nothing else is broken but no application can reach the network», and it also uninstalls the plumbing your VPN depends on.
- Risk
- Careful Reversible only by reinstalling whatever was in the catalog. Expect to reinstall or reconfigure VPN and proxy clients afterwards; expect corporate machines to need their management agent re-run.
netsh int ip reset
- What it is
- Rewrites the TCP/IP registry keys back to their install defaults. Heavier than the Winsock reset, and it is usually the second half of the same internet advice.
- What changes
- Manual addresses, custom DNS entries, interface metrics and any per-adapter tuning are gone. Restart required. If you configured a static IP for a printer or a lab network, you need that information before you run it.
- Risk
- Careful Nothing here is unrecoverable if you wrote your configuration down, and nothing is recoverable if you did not.
Advanced network settings → Network reset
- What it is
- The nuclear option, offered as one button with one sentence of warning. It removes and reinstalls every network adapter, resets all networking components to defaults, and restarts the machine.
- What changes
- Adapters come back as if the machine had just been imaged. Wi-Fi passwords, VPN connections, Bluetooth pairings, virtual adapters, manual IP and custom DNS can all need to be set up again. On a laptop with one network card, this is how you lose your only way of downloading the driver you now need.
- Risk
- Expensive Not because it breaks Windows — it does not — but because the time cost is real and it is the wrong tool for nine of the ten problems on this page. Have the Wi-Fi key and the VPN details written down before you press it, and only press it after the four lighter steps failed.
Private network versus Public network
- What it is
- A trust label on the network you are joined to. It decides whether Windows answers to discovery and whether the firewall treats the network as hostile. New networks default to public, and the prompt that asks you is easy to dismiss.
- What changes
- On private: network discovery and file and printer sharing open up, and your machine becomes visible for casting and home-group-style features. On public: they are blocked, which is exactly why «I cannot see the shared folder» and «the printer is offline» are usually this switch and not a driver.
- Risk
- Careful Technically reversible in one click. The consequence is that marking a hotel or conference network as private exposes your shares to strangers on the same subnet. Private belongs to your home and your office, and nowhere else.
Use the following DNS server addresses
- What it is
- Inside the adapter's IPv4 properties: the override that stops asking your router (or your provider) to resolve names and asks two servers you chose instead.
- What changes
- Name resolution only. It does not change your IP address, your route, or who can see your traffic — a common belief, and wrong. It fixes the provider resolver being slow or censorious, and it breaks the corporate case where internal names only resolve on the internal DNS.
- Risk
- Careful Reversible by selecting «Obtain DNS server address automatically». The failure mode is silent: pick a wrong address and every site fails to open while the connection looks perfect, which is the most confusing state on this page.
Set as metered connection
- What it is
- A label telling Windows that bytes on this connection cost you something — money, quota, or latency. It is a per-network switch, not a global one.
- What changes
- Windows defers large updates, stops background app downloads, throttles OneDrive sync, and stops offering your machine as a delivery-optimisation peer. It is also the reliable way to stop a laptop from updating itself on a phone tether.
- Risk
- Reversible One switch. The cost of leaving it on at home is that security updates stop arriving on their own schedule, which is precisely the reason not to use it as a permanent setting.
Disable this network device versus Uninstall device
- What it is
- Two different verbs on the same adapter. Disable switches it off and leaves the driver in place; uninstall removes the device node and, if you tick the box, deletes the driver package too.
- What changes
- Disable is a two-second undo and is the right diagnostic move: if disabling and re-enabling the adapter fixes the state, the answer was in the stack. Uninstall makes Windows rediscover the hardware on the next scan, which is a legitimate repair path — but if you tick «Delete the driver software for this device» on your only network card, you have removed the tool you need to fetch it back.
- Risk
- Expensive The classic self-inflicted wound. Have the driver on a USB stick or a second device before uninstalling a network adapter, and prefer disable when you are only testing.
2.4 GHz, 5 GHz and 6 GHz — the band you joined
- What it is
- Three radio bands, not three networks. Most home routers publish one name across two of them and let the device choose; the band decides range and speed, not who you are.
- What changes
- 2.4 GHz goes through walls and is slower and noisier; 5 GHz is fast and short-ranged; 6 GHz is faster still and drops quickly with distance and through any solid obstacle. If a machine two rooms from the router keeps dropping, forcing it onto 2.4 is often the actual fix, and it is done in the adapter's advanced properties, not in Windows' Wi-Fi panel.
- Risk
- Reversible A preference, not a change to your account. The only permanent-looking consequence of joining a separate 5 GHz network name is that you now have two saved profiles and the machine picks whichever it sees first.
Use this connection only for resources on its network
- What it is
- The VPN advanced property that decides whether your normal traffic goes through the tunnel. Checked, the VPN carries only the routes it explicitly advertises — split tunnelling. Unchecked, it becomes your default gateway and everything leaves through it.
- What changes
- Which of your applications can see the internet, the local network, or both. Most «the VPN connected and then nothing worked» reports are this switch interacting with a client that advertises a default route, and most «I cannot reach my printer while on VPN» reports are the opposite case.
- Risk
- Careful On a company-issued profile this setting is usually pushed by policy and changing it either does nothing or breaks the connection your employer expects. Change it only on a VPN you configured yourself.
Adjacent screens.
The other references in the library cover the places where the same problem appears in a different window.
Driver errors, translated
Code 10 and Code 37 on a network adapter produce exactly this page's symptoms, and the fix is not on this page.
Read the reference servicingWindows Update, decoded
The update that cannot install and the network that cannot resolve names are frequently the same event seen from two screens.
Read the reference every appWhat this dialog box is asking
The SmartScreen warning that appears on a captive portal, and the «Continue anyway» link that is the only way into a hotel network.
Read the reference the libraryAll guides
One hundred and fifty-six entries across thirteen families of screen, each with the same three fields.
Back to the indexYour network icon is not this page.
Those twelve states and commands are the ones a stock Windows install shows. Yours may be a corporate agent that owns the adapter settings, a router that stopped answering in a way no article describes, or an error sentence translated by the vendor who wrote it. That is the case a reference cannot cover — and the case the application reads.
Get ToolTip AI on Microsoft Store